TD2-601雙捻機

　　TD2-601雙捻機   TD2-601 Double Twister

　　簡要介紹  Briefly introduces

　　屬于“雙胞胎”設備，即兩臺設備共用一個機架。兩套獨立的機械裝置，分別由兩套獨立的電控系統控制。 該設備主要用來生產結構為1×7的半成品鋼簾線（用220工字輪收線），也可用來生產結構為1×5的成品鋼簾線（用B40、B60或B80工字輪收線）。

　　搖籃內部可放置6個188工字輪。工字輪呈水平放置在搖籃豎板的兩邊，每邊放3個，機架外部（外放線裝置）可放置1個188工字輪。

　　TD2-601 Double Twister belongs to "twins" device,that is, two devices share one frame.Two independent mechanism, are controlled by two sets of electric control system independently.This equipment mainly used to produce 1×7 semifinished steel cord( taken up by 220 spool )，can also used to produce 1×5 finished steel cord( taken up by B40,B60 or B80 spool )There are 6 spools 188 can be placed inside the cradle.The spools are placed horizontally by the side of the cradle,each side 3. Outside the frame(external wire releasing equipment),1 spools,188,can be placed.

 

　　技術參數：